LCR-T3 graphical multi-function tester resistor + capacitor + inductance + SCR + diode + transistor + mos tube
LCD 12864 LCD display, with backlight, backlight color is generally yellow-green.
The 9v battery powering stacked. If prolonged power, you can use two 8.4v lithium battery pack consisting of.
Add boot voltage detection function.
Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes ( including dual diode), thyristors, transistors, resistors and capacitors and other components
Product description
Function:
Add boot voltage detection function
Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes ( including dual diode), thyristors, transistors, resistors and capacitors and other components
Automatic test out the pin element and displayed on the LCD
Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base
Measure the gate threshold voltage and a gate capacitance of the MOSFET
12864 LCD display uses LCD
High test speed, valid component test: 2 seconds ( except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal )
One button operation, power-on test, get a key.
Power consumption off mode: less than 20 nA
Auto power off function to avoid unnecessary waste, saving battery power, improved battery life.
Specifications:
Range
Resistor:0.1-50M
Capacitor:25pF-100000uF
Inductance:0.01mH – 20H
Working power: DV-9V
Standby current: 0.02uA
Operating current: 25mA
Size of LCD screen: 3 x 5.5mm
Size of the tester: 7.3 xx 6mm
