MEGA 2560 R3 CH340 with cable
Main chip: Atmega16U2, 100% compatible to Arduino
This Mega2560 is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
54 digital input/output pins, including 16 analog inputs, 4 UARTs (hardware serial ports), Clock Speed: 16 MHz
Stronger RESET circuit.Use 5.5 * 2.1mm DC barrel jack (compatible with 5.5 * 2.5mm DC barrel jack)
Improved and expert version: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board
This version is optimized in the original version , mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.
Microcontroller: ATmega2560
Operating Voltage: 5V
Input:Voltage(recommended) :7-12V
Input Voltage (limits) : 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
How to use:
1. Download the Arduino IDE at below link: http://arduino.cc/en/Main/Software
2. Install the USB CH341 Driver.
3. Plug with 2560 Development Board, driver will be installed automatically.
4. Please choose MEGA2560 in the DIE.
5. Select the COM port, this can be find in my computer, the COM port at 2560 Development Board.
